QA/QC Consultant for CCS Project

Project overview

QA/QC Consultant for CCS Project

Assignment Description

Our client is seeking QA/QC expertise for an ongoing CCS project.

The consultant will work with quality control and quality assurance related to the project's mechanical and electrical deliveries. The assignment includes reviewing, following up, and controlling manufacturing, installation, and documentation, as well as ensuring that the project's deliveries meet applicable requirements and regulations.

The work will be carried out in close collaboration with the project organization, suppliers, and contractors.

Background and Project Information

Öresundskraft is an energy company in the Helsingborg and Ängelholm regions, wholly owned by the City of Helsingborg. The City of Helsingborg aims to drive the transition to a climate-friendly society and has set a goal to reduce fossil emissions from district heating production to near net-zero by 2030 at the latest.

Öresundskraft provides district heating, district cooling, electricity, and distributes natural gas and biogas. Within the Helsingborg region, the waste-fired combined heat and power plant, Filbornaverket, accounts for the largest point source of carbon dioxide emissions.

To achieve the city's climate goals, Öresundskraft has been working since 2020 on a project to implement carbon capture at Filbornaverket. The goal is to have a full-scale carbon capture facility in place by the end of 2029. The carbon dioxide will then be transported to a geological final repository.

Öresundskraft has contracted Linde Engineering GmbH as the supplier of the carbon capture facility. The supplier has completed FEED (Front End Engineering and Design). In the autumn of 2026, the execution phase of the project, EPC (Engineering Procurement Construction), will begin. The project is being carried out in a partnering model, which involves close collaboration with the supplier.

Description of Need

Examples of Work Tasks

The consultant reports to the client and will actively support the project in quality control by:

Delivery Requirements

Mandatory Requirements

• The client wants to quality assure the work performed by subcontractors to the supplier Linde Engineering GmbH.
• Travel to subcontractors is included in the expected assignment based on project needs. Subcontractors are mainly located in Europe but also in Asia.
• Note: The consultant is not responsible for performing quality controls. The consultant shall represent the client and observe quality controls on behalf of the client.
• Monitoring the contractor's subcontractors.
• Monitoring compliance reviews of technical documents.
• Monitoring the implementation of the project's overall quality control and inspection plans.
• Reviewing and managing subcontractors' quality control procedures.
• Monitoring installation inspections in close collaboration with the installation team and work package managers.
• Monitoring non-destructive testing (NDT) activities.
• Participating in FAT and SAT of deliveries at subcontractors' facilities.
• Participating in pre-delivery inspections or reception inspections of project deliveries at the subcontractor or upon arrival.
• Reviewing and ensuring complete technical documentation related to quality documentation and quality registers.
• Following up on conducted reviews and monitoring through dialogue and feedback to the contractor Linde Engineering GmbH.
• Reports shall be submitted to the client within the agreed time.
• Continuity shall be ensured during the assignment. It should, as far as possible, not be different individuals on each trip.
• The resource must be approved by the client or be part of a pre-approved team.

Requirements

Meritorious

It is meritorious if the consultant has:

Information Requested in Application Bidders shall provide:

Travel will be made to subcontractors in Germany.

Start Date: 2027-01-11

End Date: 2028-12-22

Estimated Total Time for Assignment (Scope): 1200 hours spread over 2 years

Option: Option to extend the contract by 3 months. Options utilized in this agreement will always be under the currently applicable terms.

Option to increase the scope of the assignment to also include installations on-site (Filbornaverket, Helsingborg). This phase of the project runs from 2028-05-31 to 2029-12-21. This means part of the work runs parallel to the original assignment and continues for an additional year.

This option will be an additional 1200 hours.

Remuneration Method: Remuneration will be based on a variable fee.

Fee: Remuneration will be based on a variable fee (hourly rate against budget).

The hourly rate may be index-regulated.

Invoicing Information: PayExpress is standard for all our contracts. See information below. Otherwise, payment terms are 30 days + 1-5 days for administration.

Last day for questions from bidders: 2026-11-01 23:59

Last day for offers: 2026-11-44 23:59

Received offers will be evaluated based on the following parameters:

For work at Filbornaverket's site, approved SSG training is required, see Appendix 1. For work at the facility, daily check-in and check-out with a personal SSG card must be done in the SSG system.

Assignment terms are according to the framework agreement.

We often offer on a rolling basis. This means we sometimes remove assignments from our website earlier than the last application date. If you are interested in an assignment, we recommend applying immediately.

PayExpress:

We now offer a fast and smooth payment solution, so you avoid long waiting times. With us, you receive your payment within 3-5 days after your timesheet has been approved. This benefit is included as standard in almost all our agreements without extra work on your part. Read more at the following link: https://knowledge.eworkgroup.com/payexpress-get-paid-within-days-not-months

Questions and Answers (will be updated below):

• In-depth knowledge of European directives, especially:
• Pressure Equipment Directive (PED) (2014/68/EU)
• Machinery Directive (2006/42/EC)
• Electrical Directives LVD/EMC and related national regulations
• Knowledge of welding and associated ISO 3834-2.
• Minimum 6-8 years of work experience in quality control in the mechanical and electrical fields.
• Pressure testing experience.
• Very good knowledge of Swedish and English, both spoken and written.
• Experience from working in highly regulated industries such as the nuclear power industry, life sciences, or the oil and gas industry.
• Two reference assignments from the last five years for similar assignments, especially welding.
• One reference person per assignment (a total of two reference persons).
• Experience working with high-speed rotating components such as compressors and turbines.
• Focus on customer needs and satisfaction, and experience in following up and maintaining a high level of quality and productivity in deliveries.
• Good computer skills and very good knowledge of MS Office.
• Experience from assignments within ÖKAB.
• QC Inspection Level certification.
• ☒ CV (competence / experience)
• ☒ Reference assignments
• ☒ Certificates (IWT or IWI-S, NDT)
• ☒ Organizational chart for offered consultants
• team
• ☒ Price
• ☒ Availability
• ☒ Any confidentiality request
• Scope and Location of Assignment
• The hourly rate may be index-regulated once per year according to index K21, with the contract month as the base month.
• Competence / experience
• weighting: 30%
• weighting: 20%
• Interview

Project details

• Start: 2027-01-11
• Remote: hybrid
• Location: Helsingborg, Sweden, SE
• Languages: Swedish